shopping cart 0 item(s) - £0.00

Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models

Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models
Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models Day Running Lights kit LED DRL for X290 type Fiat Ducato 2014 to 2024 models
Product Code: LV007F
Availability: In Stock
Price: £83.00
Ex. VAT: £69.17
   - OR -   

New

These are LED day running lamps for the  Fiat Ducato, Citroen Relay and Peugeot Boxer X290 models 2014 onwards Vans and Motorhomes including the latest Series 8 models.They are not suitable as a replacement for factory fitted fog lamps or cornering lights. They are a high quality fully customised kit, assembled in the UK and tailor made for these vehicles. The lamp has a black outer ring with an easy fit securing cap at the back.

The full kit contains everything needed for successful installation:

  • Pair of Day Running Lamps with rear securing caps
  • Control Module
  • Wiring Loom and connectors
  • Brackets and all fasteners
  • Easy to follow fitting instructions

The lamps have a cast alloy body with a vent valve to regulate temperature and pressure inside the lens. They are fitted with four LED bulbs which have a very high brightness of 6000k, which is the same technology found in many high end manufacturer's vehicles. The lamps are also E marked and meet the current ECE R87 regulations.

The lights will switch on and off with the ignition. The controller can be connected so that the lights will dim or go off with the headlamps depending on customer preference. 

These lamps are designed to fit into the bottom fog light moulding blank aperature in the bumper. For models with factory painted bumpers the mouldings can be unclipped from the back. Models with grey textured plastic bumpers will need a 76mm hole cut.

They come with an easy fit wiring loom with only three simple connections required under the bonnet - no complicated under the dash dismantling. They are a stand alone system and 100% compatible with the vehicle's canbus wiring.

By fitting these Day Running Lamps you will be more visible to other drivers and pedestrians meaning increased road safety. If your vehicle does not have the factory fitted LED DRL's inside the headlamps these offer a much brighter and consume less power that the standard 21 watt bulb type that come as standard.

Please see the 'download' tab above for a copy of the fitting instructions

Ledcom Ltd. © 2024